A professional custom furniture manufacturer.

What kind of board is good for a custom wardrobe?

by:Jinlon Furniture     2021-11-26
In addition to choosing the style and design of the custom wardrobe to be consistent with your own furniture style and style, the more important point is that the selection of the custom wardrobe is the key. If you do not choose the board of the custom wardrobe, then the perfect custom wardrobe may just A bubble or behind it increases your cost faintly, but you don't know it at all. So what materials are available for custom wardrobes? Which of these materials should we choose? What are their advantages and disadvantages? Take you a look. 1. Woodworking board Woodworking board is the blockboard on the market. It is a board made of natural peeling veneer and solid wood jigsaw after gluing and hot pressing. According to the quality of the material and the texture of the surface material, it can be divided into 'superior productThe inner core material is also poplar, birch, pine, paulownia, etc. The face material can be laminated with one or two layers of veneer on both sides of the core, and can be classified into three-layer blockboard and five-layer blockboard. In the production process of blockboard, there will be problems such as excessive formaldehyde emission, unqualified transverse static bending strength, unqualified product moisture content, and low bonding strength. It is a common practice in woodworking furniture to add a layer of three-centimetre board with wood grain to the blockboard and then paint it. Advantages: affordable; easy to process, it is a common board for woodwork to make furniture by hand, and it is more suitable for furniture interior board. Disadvantages: Many blockboards have excessive release of nails; easy to deform; some boards are hollow, which will affect the screw bite force, so the quality of the blockboard is the key. 2. Introduction of Chinese fir integrated board board: Chinese fir board is also called finger joint board. It is spliced u200bu200bin small sections, and all the splicing joints must use glue; secondly, the wood of this kind of board is relatively soft, and the strength is not enough. , It is easy to deform and crack; third, its surface is not flat and easy to mark clothes, and the way to solve the problem is to polish and paint, which will cause a large cost, second, it is odorous, not environmentally friendly, and third, the paint is easy to change color. Cracking and falling off. Fourth, it is easy to grow insects and difficult to care for. Advantages: affordable, more environmentally friendly when not polished and painted, with the fragrance of cedar itself. Disadvantages: The surface is rough and easy to scratch clothes; because it is easy to deform and crack, it can only be fixed to the wall during processing, and cannot be moved; the surface of the plate has many piles and small holes, which is not beautiful; it must be processed through multiple processing (holes, Sanding, waxing or lacquering) and not put into use until the smell is scattered. 3. Introduction of pure solid wood, imitation solid wood, and solid wood veneer panels: The substrate used in solid wood furniture is natural wood, and the real wood pattern can generally be seen on the surface. Pure solid wood furniture means that all the materials used in the furniture are solid wood, including the tabletops, wardrobe doors, side panels, etc., are made of pure solid wood, and no other forms of wood-based panels are used. Pure solid wood furniture requires high craftsmanship and material quality. The requirements for solid wood material selection, drying, finger jointing, and seaming are very strict. The whole set of furniture is deformed so that it cannot be used. Imitation solid wood furniture is solid wood furniture from the appearance. The natural texture, feel and color of wood are exactly the same as solid wood furniture, but it is actually a mixture of solid wood and wood-based panels, that is, thin wood for side panels, top, bottom, and shelves. Veneer particleboard or medium density fiberboard. Solid wood veneer generally refers to solid wood veneer, with solid wood veneer on the surface and MDF inside. The performance is more stable than pure solid wood, and it is not easy to crack, but it is not as environmentally friendly as pure solid wood. Advantages: The style, nobility, and original temperament caters to people's psychology of returning to nature. Disadvantages: The price is higher and it is difficult to take care of; because of the painting process, it is easy to change color, which is why the color of solid wood furniture will be darker and darker. The fatal defect of solid wood furniture is that the change in moisture content makes it easy to deform. It needs special care, such as not letting the sun shine, not too cold or extremely hot, and too dry and humid environments are not suitable for solid wood furniture. of. If you do not pay attention to it during use, frequent switching on and off of the air conditioner causes excessive temperature and humidity changes, even qualified solid wood furniture products will sometimes experience deformation and cracking. 4. Introduction of melamine board: melamine board, full name is melamine impregnated adhesive film paper veneer wood-based board. It is made by immersing paper with different colors or textures in a melamine resin adhesive, then drying to a certain degree of curing, and paving it on the surface of particleboard, medium-density fiberboard or hard fiberboard, and then pressing it. Decorative plates. At present, the substrates used in panel furniture on the market are all of this type, and the substrates are divided into trihydrogen particle board and trihydrogen ammonia density board. Melamine board has more changes in appearance design and more individuality. It is the preferred material of European top furniture manufacturers. However, the environmental protection requirements of the board are very strict, and it must meet the European E1 standard. Advantages: affordable; no deformation, no cracking, no fading; rich colors; assembly and disassembly are very convenient, high-precision panel furniture can be disassembled and installed many times; environmentally friendly and fashionable. Disadvantages: It is also environmentally friendly. Furniture made of wood-based panels with excessive formaldehyde will cause indoor environmental pollution. Consumers should pay attention when buying. You can open the cabinet door or drawer and smell it. If there is a strong irritating odor, most of the formaldehyde exceeds the standard and should not be purchased.
Anyone who has seen the latest custom made furniture wood furniture manufacturers in operation cannot help but be impressed with how far the technology has progressed over the past few years.
Crazy about products? Shouguang Jinlon Furniture Co.,ltd. is the place you must shop at, do visit Jinlon Furniture to check out our latest collections!
We studied how market-leading companies are harnessing data to reshapeShouguang Jinlon Furniture Co.,ltd., and explored how they can put data to work for us in ways that create value for our own businesses.
The manufacturing industry is changing fast, so, for Shouguang Jinlon Furniture Co.,ltd., being able to pivot and adapt as the marketplace shifts is imperative.
Custom message
Chat Online
Chat Online
Chat Online inputting...