What are the manufacturing process standards for connecting wood and dust-proof panels in cabinet furniture?

The basic components of cabinet furniture include: panel, top (bottom), partition (movable and fixed), front frame, rear frame, side panel or side frame (including core frame, glass frame), door (glass frame) Doors, solid wood doors, curved wood doors), drawers (hollowed out, solid surface, fiberboard), decorative strips (front and side), connecting wood (including triangular wood) dust-proof board, hardware. Connecting wood 1. Connecting wood is generally grouped at the junction of components and components to play a role of connection and reinforcement. Different materials are selected according to actual requirements, and are generally divided into hardwood and softwood. 2. Connecting wood can be divided into ordinary connecting wood and special-shaped connecting wood. 3. The connecting wood where the hand can touch must be inverted, and the material requirements must be connected to the rear frame requirements. 4. When the connecting wood group is on another component, it must be ensured that there is a gap of 0.5mm-1mm between the position of the connecting wood and the other component in order to achieve the maximum connection effect. Related reading: Panel and top and bottom dust-proof panels of the basic components of cabinet furniture 1. The dust-proof panel is located inside the entire cabinet to prevent dust on the upper end from falling into the door or drawer. 2. The thickness of the dustproof board is generally two kinds of 3mmMDF board and 5mmMDF board. 3mm is generally used to block the dust in the drawer, and 5mm is generally used to block the dust in the door. A mooring sheet must be attached to the inner surface. The mooring sheet must be in accordance with the requirements of the inner surface of the side panel, and it must be well sanded and colored. 3. Dust-proof plate connection method Generally, the front and rear ends are inserted into the dust-proof plate groove of the front frame and the rear frame, and the two ends are fixed with connecting wood and horse nails and straight nails. 4. The dustproof board is generally not allowed to be made of plywood to prevent the plywood from being deformed by moisture. Hardware 1. Hardware is generally grouped on the front of the cabinet and inside the cabinet with doors. The front is generally handles, hinges, adjustment pads, foot nails, etc., and the inside is generally door clips, power sockets, lamps, angle irons, and the like. 2. The color of the handle. The appearance must meet the requirements of actual use. 3. The color of the hinge must meet the actual requirements, and the opening angle must be determined according to the design. The screw head is not allowed to be exposed during assembly, and no pollution is allowed during painting. 4. Door clamps are generally divided into three types: high feet, magnetic bumps, and low feet, which are mainly used to control the position of the door. The screw head must be an umbrella head when assembling. 5. Power sockets, lamps and electrical wires must be affixed with UL labels, and the installation location and installation method must meet the requirements.
Shouguang Jinlon Furniture Co.,ltd. has various branches in local businesses, servicing customers and helping to pull in traffic to those businesses.
Shouguang Jinlon Furniture Co.,ltd. offers the best products, high-quality services and innovative technology.
Jinlon Furniture clearly and succinctly expresses what our company is all about. Strong brands cut through the noise to grab the audience and immediately shed light on the character of the product or service.
This is crucial when you need to maintain innovative information in wood furniture manufacturers.