What are the basic components of cabinet furniture?

The basic components of cabinet furniture include: panel, top (bottom), partition (movable and fixed), front frame, rear frame, side panel or side frame (including core frame, glass frame), door (glass frame) Doors, solid wood doors, curved wood doors), drawers (hollow out, solid surface, fiberboard), decorative strips (front and side), connecting wood (including triangular wood) dust-proof board, hardware. Front frame 1. Used on the front of cabinet furniture, connected to the side panels and panels to form a whole, and play the role of fixing the door and supporting the drawer. 2. The basic components are: uprights (left and right), front horizontal scales (upper, middle, lower horizontal scales and inner horizontal scales), and the thickness is generally required to be more than 20mm. 3. The front cabinet of the cabinet with a width of more than 36 must be designed with a 1pc mid-vertical column support to increase the firmness of the structure. Such as: dressing table, cupboard, etc. 4. In order to prevent chipping caused by pushing the front column, in principle, it must be chamfered when contacting the ground. 5. The shape of the front cabinet varies according to the design needs of the product. Related reading: What are the process standards for cabinet furniture? 6. Whether it is parallel or curved front frame, the structural requirements are the same. 7. All parts must be square and symmetrical (curved parts). After assembly, the inner diameters of the horizontal scales must be parallel and consistent, and the whole must be flat, square, and tight in structure. 8. The purpose of the side plate groove of the column is not to transmit light, so the groove depth and width must have enough allowance to facilitate the side plate assembly. After the side panels are assembled, the sides of the front frame and the side panels must be parallel (allowable error ±0.2mm). 9. All parts must be flat sanding machine with fixed width, fixed thickness, and allowable outer diameter (after the frame is composed) +0mm-0.5mm. When the door is horizontally or vertically weighed, and the drawer is recessed, it must be sanded.
To that end, Shouguang Jinlon Furniture Co.,ltd. has successfully built a solid foundation and infrastructure for wood furniture manufacturers manufacturing.
You can always ask the experts for the most appropriate custom made furniture wood furniture manufacturers for your specific needs. Find the best support, prices and other to wood furniture manufacturers solutions at Jinlon Furniture.
Many of the wood furniture manufacturers listed here can be purchased for less money, but in general we recommend paying a slightly higher price for significantly improved performance. These are our top choices and their recommended configurations.