The heavier the wood, the better, the harder and more stable? A salesperson showed the rubber wood partitions in the cabinet to reporters, 'You see that our partitions are so heavy, you scratch it with your hand, but there is no print, which shows that the wood is good.' In another brand store, the salesperson told The reporter introduced: 'You see that our wood is very thick and hard, second only to mahogany, and of course the quality is good.' When the reporter asked about the stability of furniture
, the salespersons would say that the wood used is hard, so it is stable. Excellent. Expert explanation: Sun Shudong, director of the Furniture Inspection and Timber Appraisal Laboratory of the National Furniture and Indoor Environmental Quality Supervision and Inspection Center, said that the statement that the greater the density of wood, the more stable it is, is pure flicker. Like some wood with good stability, such as teak, pineapple grid, phoebe, etc., their density is not high, and the relationship between high density and quality is not necessarily proportional. The reason why mahogany is mahogany is not only because of its high density, but also because of its beautiful pattern and smooth wood. Is straight-joined material better than finger-joined material? A salesperson said that the door panels of their wardrobe are made up of two whole boards. Because the wood is one piece, the price is higher, while the finger joints and glulam 'are all scraps, of course not. Good.' But some furniture salespersons who use laminated wood told reporters that the performance of the whole piece of wood is unstable and easy to deform and crack. Expert explanation: It means that spliced u200bu200btimber and glulam do use branch timber, and there is no question of good or bad. Sun Shudong introduced that it improves the utilization rate of wood, and compared with the solid wood sawn timber of the same species (the so-called straight wood on the market), its performance is relatively stable, and it is less prone to deformation and cracking; from the price point of view, it is relatively cheap; but it is beautiful. The sex is slightly insufficient, and consumers can choose according to their own needs. Is solid wood furniture
more environmentally friendly? During the investigation, more than one salesperson told reporters that solid wood furniture is the most environmentally friendly. Is this really the case? Experts explain: The environmental protection of solid wood furniture is also relative. From a traditional point of view, solid wood furniture uses pure natural materials, and man-made panels contain formaldehyde, which makes solid wood furniture more environmentally friendly. But in fact, from the perspective of 'big environmental protectionAccording to environmental protection standards, solid wood furniture is actually more destructive to the environment than man-made panels. Is the deformation and cracking of solid wood furniture inevitable? In the process of visiting the market, some salesmen of board-wood combined furniture said that solid wood furniture is easy to crack and deform, which is not particularly good. Some solid wood furniture salesmen also said that deformation and cracking of solid wood furniture are inevitable, and the company will provide certain Repair service. Is this the fact? Expert explanation: According to Sun Shudong, wood is indeed prone to wet expansion and shrinkage, but if the production process is in place, the wood is dried properly and the seams are in place, solid wood furniture is not easy to crack and deform. In the production process of solid wood furniture, the most important thing is the wood drying process. If the drying is not done well, the finished furniture will be easy to crack and deform. If it is dried in place, the stress of the wood itself will be relieved without too much deformation. , The problem of cracking. Is there really a difference between north and south furniture? When the reporter asked about the stability of the furniture, a salesperson repeatedly emphasized that the furniture was produced locally in Beijing. Compared with the southern furniture, the moisture content and other properties are better, and the furniture will be more stable. Is there really a difference between north and south furniture? Experts explain: Wet expansion and shrinkage are the nature of wood, and Beijing's relative humidity changes greatly, and wooden furniture is prone to deformation. Regardless of whether it is furniture from the south or the north, the wood needs to be dried and meet the corresponding standards before being made into furniture. Experts said that the moisture content of furniture sold in Beijing must meet Beijing's moisture content requirements. As long as the corresponding process standards are met, there will be no problems of deformation and cracking, which has little to do with the place of production.
In the past few decades, custom made furniture production has increased because of the use of wood furniture manufacturers
For details on wood furniture manufacturers, see Shouguang Jinlon Furniture Co.,ltd. at Jinlon Furniture.
We are professional in manufacturing wood furniture manufacturers, and always emphasize the technology and quality during the producing procedure.