A professional custom furniture manufacturer.

Reference for 4 kinds of environmental protection panels for bedroom wardrobes

by:Jinlon Furniture     2022-03-06
Nowadays, many consumers are decorating their new houses. Due to budget problems, they choose to invite the carpenter to make the kind of spacious and practical in-wall wardrobe at home. However, because in the bedroom, everyone spends one-third of the time in the bedroom every day. In the past, choosing healthy and environmentally friendly panels is the most important. For several commonly used boards, the comparison is as follows, for reference only: 1. Introduction of Chinese fir integrated board Glue must be used for all splicing joints; secondly, the wood of this kind of board is relatively soft, its strength is not enough, and it is easy to deform and crack; thirdly, its surface is uneven and it is easy to tick clothes, so the solution to tick It is sanding and painting, which in turn will cause a high cost, secondly, it is odorous and not environmentally friendly, and thirdly, the paint is easy to change color, crack and fall off. Fourth, it is easy to grow insects and difficult to take care of. Extended reading: Advantages and disadvantages of Chinese fir furniture 2. Introduction of pure solid wood, imitation solid wood, and solid wood veneer panels: The substrate used in solid wood furniture is natural wood, and the real wood pattern can generally be seen on the surface. Pure solid wood furniture means that all the materials used in the furniture are solid wood, including the tabletops, wardrobe doors, side panels, etc., are made of pure solid wood, and no other forms of wood-based panels are used. Pure solid wood furniture has high requirements for craftsmanship and material. The requirements for solid wood material selection, drying, finger jointing, and seaming are very strict. The whole set of furniture is deformed so that it cannot be used. Imitation solid wood furniture is solid wood furniture from the appearance. The natural texture, feel and color of wood are exactly the same as solid wood furniture, but it is actually a mixture of solid wood and wood-based panels, that is, the side panel top, bottom, shelf and other parts. Thin wood veneer particleboard or medium density fiberboard, doors and drawers are made of solid wood. This process saves wood and also reduces costs. So the price is more acceptable. Furniture manufacturers sometimes paint solid wood furniture with varnish or matt paint to express the natural color of the wood. Solid wood veneer generally refers to solid wood veneer, the surface of the solid wood veneer, inside is the density board. Compared with pure solid wood, the performance is stable and not easy to crack, but it is not as environmentally friendly as pure solid wood. Advantages: The style, noble, and original temperament caters to people's psychology of returning to nature. Disadvantages: The price is higher and it is difficult to take care of; because of the painting process, it is easy to change color, which is why the color of solid wood furniture will become darker and darker. The fatal defect of solid wood furniture is that the change in moisture content makes it easy to deform. It needs special care. For example, it cannot be exposed to sunlight, not too cold or hot, and too dry and humid environments are not suitable for solid wood furniture. of. If you do not pay attention to it during use, and frequent switching on and off of the air conditioner causes excessive temperature and humidity changes, even qualified solid wood furniture products will sometimes deform and crack. Extended reading: the purchase of solid wood furniture under the regional differences between north and south. 3. Introduction of melamine board: melamine board, the full name is melamine impregnated adhesive film paper veneer wood-based board. It is made by soaking paper with different colors or textures in a melamine resin adhesive, then drying to a certain degree of curing, and paving it on the surface of particleboard, medium density fiberboard or hard fiberboard, and then pressing it. Decorative plates. At present, the substrates used in panel furniture on the market are all this kind of boards, and the substrates are divided into trihydrogen particle board and trihydrogen ammonia density board. Melamine board has more changes in appearance design and more individuality. It is the preferred material of European top furniture manufacturers, but the environmental protection requirements of the board are very strict, and it must meet the European E1 standard. Advantages: affordable; no deformation, no cracking, no fading; rich colors; assembly and disassembly are very convenient, high-precision panel furniture can be disassembled and installed many times; environmentally friendly and fashionable. Disadvantages: It is also environmentally friendly. Furniture made of wood-based panels with excessive formaldehyde will cause indoor environmental pollution. Consumers should pay attention when buying. Open the cabinet door or drawer and smell it. If there is a strong irritating smell, it is mostly formaldehyde exceeding the standard and should not be purchased. 4. Woodworking board Woodworking board is the blockboard on the market. It is a board made of natural peeling veneer and solid wood jigsaw after gluing and hot pressing. According to the quality of the material and the texture of the surface material, it can be divided into 'superior productThe inner core material is also poplar, birch, pine, paulownia, etc. The surface material can be laminated with one or two layers of veneer on both sides of the core, and can be classified into three-layer blockboard and five-layer blockboard. In the production process of blockboard, there will be problems such as excessive formaldehyde emission, unqualified transverse static bending strength, unqualified product moisture content, and low bonding strength. It is a common practice in woodworking furniture to add a layer of three-centimeter board with wood grain to the blockboard and then paint it. Advantages: affordable; easy to process, it is a common board for woodwork to make furniture by hand, and it is more suitable for furniture interior panels. Disadvantages: Many blockboards have excessive release of nails; easy to deform; some boards are hollow, which will affect the screw bite force, so the quality of the blockboard is the key. Advantages: affordable, more environmentally friendly when not polished and painted, with the fragrance of cedar itself. Disadvantages: The surface is rough and easy to scratch clothes; because it is easy to deform and crack, it can only be fixed to the wall during processing, and cannot be moved; the surface of the plate has many piles and small holes, which is not beautiful; it must be processed through multiple processing (holes, holes, Sanding, waxing or lacquering) and not put into use until the smell is scattered.
The point for Shouguang Jinlon Furniture Co.,ltd. is that managerial processes are as important as other inputs in production and can create significant competitive advantage.
Shouguang Jinlon Furniture Co.,ltd.’s mission is to provide high quality care and services to our members and to be profitable in the process.
We create a group of experts to promote the quality standard and innovative technology of wood furniture manufacturers.
Digging into our roots and acknowledging out heritage can be fruitful on both a high-quality and professional level of wood furniture manufacturers.
Shouguang Jinlon Furniture Co.,ltd.'s wood furniture manufacturers are sturdy, easy to operate, friendly work machines that deliver high-quality custom made furniture for custom made furniture purposes.
Custom message
Chat Online
Chat Online
Chat Online inputting...